Laisimo L1 200W TC APV

$59.95 $54.95
(You save $5.00)
Laisimo L1 200W TC APV

Laisimo L1 200W Temp Control Box Mod | Bluetooth Enabled

This Laisimo Li 200w Temperature Control Box mod is even Bluetooth enabled. It supports Nickel, Stainless wire and titanium when in temperature control mode. It has a 2,4 inch colour OLED screen which shows your settings. It has an easy menu system with many custom features to choose from. You can even use an app to control it using Bluetooth and you can get vaping reports sent to the app from the device. It needs twi 18650 batteries to work and there is a magnetic door on the battery case to make it really easy to put the batteries in and remove them when they need charging. It is possible to update the firmware using a micro-USB port but the batteries have to be removed from it for charging. It is 510 threaded. It provides protection against short circuits, low voltage, reverse batteries and low resistance as well as overheating.

Note: The Laisimo L1 200W APP for Android 4.4 may be downloaded here.

The Laisimo L1 200W TC requires two high drain (20A) 18650 batteries (not included) which can be easily replaced via the magnetic battery cover. The firmware is updatable via the micro-USB port.  An external charger, such as the NiteCore D2/D4 is required for recharging. 

Features and Specs:

  • Dimensions: 101*53.5*24.5mm
  • 510 Threaded
  • Bluetooth Laisimo L1 Android APP
  • Wattage Output: 5.0 - 200.00W
  • Voltage Output: 0.5 - 7.5V
  • Temperature Control : Ni200 / Titanium / Stainless Steel
  • Temperature Range: 212°F - 572°F / 100°C - 350°C
  • Temperatue Control Wattage Output: 5.0 - 70.0W
  • Resistance Range: 0.05Ω - 2.5Ω
  • Large 2.4 Inch OLED Color Display Screen
  • Magnetic Battery Cover
  • Micro USB Port for Future firmware updates
  • Low voltage protection
  • Low resistance protection
  • Short circuit protection
  • Reverse battery protection
  • Overheating protection


  • 1 x Laisimo L1 200W Mod
  • 1 x User Manual
  • 1 x Warranty Card